What we actually repair
- Dented and creased panels from hail, limbs, ladders and equipment. Aluminum dents where vinyl cracks — still a documented loss.
- Loose, rattling and lifted panels where the lock released or the original nailing failed. If you can hear your siding in a windstorm, it has already started to let go.
- Punctures and holes, including woodpecker damage, which needs the cavity addressed and not just the hole covered.
- Failing soffit, fascia and trim capping at the roof edge. This is the line where water and animals get in and it is where we look first.
- Corner posts, J-channel and window wrap that has separated and is letting water behind the wall.
- Cornice and roof-edge metal — on older attached houses the decorative cornice and its capping are the highest-consequence metal on the building and the least often inspected.
- Chalking, oxidation and rust bleed. We tell you whether the metal is sound enough to repaint or whether the finish is past saving.
Before we quote, we open a test section
On stock of this age the aluminum is frequently a jacket over the original wood siding, and what is behind it changes the job. We routinely find no housewrap at all, gaps at penetrations, rot at the base of walls and around windows, and on anything predating 1978, lead paint on the wood underneath. On some of the older county stock we also find asbestos-cement shingle siding under the aluminum — if that is what comes off, work stops and it is handled by a licensed abatement contractor before we go any further. None of that is a reason to panic. It is a reason to look before anybody signs anything.
How it works in Towson
- Free inspection and photo report within 24 hours. Every elevation walked and photographed, panel profile and exposure identified, trim line and roof edge checked while we are there.
- A straight answer on repair versus replace. If a repair will look obvious and you would hate it, we say so. If the metal is sound and repair is genuinely right, we say that too, even though it is the smaller job.
- If it is storm damage, we document it and meet your adjuster with photographs and a line-item scope.
- The work, warrantied. Written scope, MHIC #111971, workmanship warranty in writing.
Areas we cover
- 21204
- 21286
- 21252
- 21285
- 21212
- Rodgers Forge
- Anneslie
- Stoneleigh
- Idlewylde
- Loch Raven Village
- West Towson
- Knollwood
- Southland Hills
Free Towson aluminum siding repair inspection
Photo condition report within 24 hours. No obligation — the report is yours either way, even if you never hire us.
Where we work in Towson
Crews cover Rodgers Forge, Anneslie, Stoneleigh, Idlewylde, Loch Raven Village, West Towson, Knollwood and Southland Hills, across 21204, 21286, 21252, 21285, 21212. The rowhome blocks have alley access and shared rear yards, which limits where a dumpster can go. The detached streets are straightforward.
Related in Towson: roof repair, roof replacement, storm damage, aluminum siding repair, aluminum siding replacement. See also what drives roof replacement cost here and how a Maryland roof insurance claim works. Water coming in right now? Emergency leak response.
We are also a licensed general contractor, which matters more than it sounds on a siding job. When we open a wall and find rot, failed sheathing or no housewrap, we are licensed to fix it under the same contract rather than stopping work and handing you a referral.
Towson aluminum siding questions
Can you still get aluminum siding to match a Towson house?
Often yes. Aluminum siding was made in a limited set of panel profiles and exposures and salvage and specialty suppliers still carry many of them. Colour is the harder part, because decades of sun have moved your existing panels off their original shade. We bring a sample board, compare in daylight against your actual wall, and tell you honestly whether a repair will read as invisible or whether one full elevation is the better call.
Can you replace just one panel?
Yes. Aluminum interlocks, so a single damaged panel can be unlocked with a zip tool and swapped without disturbing the panels around it. That is a genuine advantage aluminum has over vinyl, which tends to crack when you unlock it cold.
What do you find under aluminum on Towson houses?
Mostly brick, with aluminum concentrated where it always is: soffit, fascia, trim capping, porch ceilings, dormer cheeks and gable ends. On the rowhome blocks the aluminum trim at the roof edge is doing more work than people realise, because it is the only thing between weather and the exposed edge of the roof deck.
Is this covered by insurance?
Frequently, when the cause is a covered peril like hail or wind rather than age and wear. Dents count as damage even when the panel still sheds water. The claim turns on documentation, which is what the photo report and the on-site adjuster meeting are for. Whether your specific loss is covered is your carrier's determination under your policy, not ours.