Vinyl and fiber-cement systems that fix curb appeal, insulation, and water intrusion in one pass — including hail-damaged siding most homeowners never knew they had.
Free inspection, typically within 24 hours, of every elevation. If your siding is fine, we'll say so in writing — and the photo report is yours either way.
Worst case: free professional proof your roof is healthy. Best case: we document damage while it's still claimable — 532 NOAA-verified wind & hail events have hit DMV counties this season, and claims have deadlines.
★★★★★ 4.9 · 139 Google reviews · GAF Factory-Certified · MHIC #111971
30 seconds. A real person confirms within one business hour (8am–7pm).
Free inspection, typically within 24 hours + full photo report — free. You keep the report either way. $0-down financing available.
Book My Free Inspection →Cracked panels and open seams look like a paint-and-patch job. What's happening behind them is the expensive part. Typical DMV ranges below.
One cracked panel or open J-channel wicks water past the housewrap. Sheathing rots invisibly for years — you find out when a wall goes soft.
Open walls + replace sheathing: $4,000–$12,000Gapped, warped siding leaks air at every seam. Heating and cooling loss through a poor envelope is a bill you pay every single month.
Typical wasted energy: $200–$500 per yearA damp wall cavity is exactly what mold, carpenter ants, and mice are looking for. Remediation is a separate licensed trade with separate pricing.
Mold remediation: $2,000–$6,000Faded, hail-pocked, or mismatched siding is the first thing a listing photo shows. Buyers discount for it — usually by more than the siding costs.
Typical resale discount: $5,000–$15,000Typical ranges, not quotes. The free inspection tells you — with dated photos — whether your siding is cosmetic, compromised, or claimable.
New siding is the single biggest exterior facelift a house can get — fresh color, crisp trim, and lines that read as a recently updated home the day it goes on the market.
We don't just hang panels. We inspect the sheathing, install a proper housewrap and flashing at every window and door, and stop the air infiltration that drives up heating and cooling bills.
Roof, siding, gutters, and trim handled by the same licensed company — no finger-pointing between trades when the elevations have to line up.
The value leader — color-through panels that never need repainting, low maintenance, and insulated backing options that add R-value. A wide profile and color range to match any DMV neighborhood.
James Hardie-style board that reads as premium, takes paint beautifully, and resists impact, rot, and fire far better than vinyl. The choice when you want a wood look that lasts decades.
A siding job is only as clean as its details — wrapped windows, new corner posts, soffit and fascia, and matched accessories so the whole elevation finishes tight.
| Insulated vinyl | Fiber cement (James Hardie-style) | Engineered wood (LP-style) | |
|---|---|---|---|
| Typical installed cost* | $6–$10 per sq ft ($12,000–$20,000 whole home) | $8–$14 per sq ft ($18,000–$35,000 whole home) | $7–$12 per sq ft ($15,000–$28,000 whole home) |
| Expected life | 25–40 years | 30–50 years | 25–35 years |
| Maintenance | None — color-through, never repaint | Repaint every 12–15 years; takes paint beautifully | Repaint every 10–15 years; factory finishes available |
| Impact & fire | Good; can crack in severe hail | Excellent — resists hail, rot, and fire | Very good impact resistance; treated against rot and pests |
| Best for | Value, low maintenance, fast payback | Premium wood look, forever homes, resale punch | Real wood grain warmth, lighter and easier to detail than fiber cement |
*Typical DMV ranges for an average two-story home — wall area, stories, and trim scope move the number. We quote both systems side by side, in writing.
Looking to replace aluminum siding? Many Maryland homes built before 1980 still wear their original aluminum panels — and hail leaves permanent dents in aluminum that insurers routinely recognize as storm damage. We handle aluminum siding removal and replacement across Maryland: the old aluminum comes off, the sheathing underneath gets inspected, and modern insulated vinyl or fiber cement goes on — with every dented elevation photographed and documented in case your policy covers the upgrade.
Actual United Developers projects — roofing, siding, and trim handled by one accountable crew.
If a recent storm crossed your county, siding is often part of the damage — and it's a different process. We keep all storm and insurance guidance on one page. See how storm restoration works →
A siding job succeeds or fails at the details you never see again — housewrap, flashing, sheathing. Here's the order we do it in, so those details are right before a single panel hides them.
A specialist walks all four sides — panels, seams, caulk lines, trim — with dated photos. Hail-pocked or wind-torn siding gets flagged as potentially claimable while it still is; ordinary wear gets called ordinary wear.
Day 1 · FreeInsulated vinyl, fiber cement, and engineered wood priced side by side against your actual wall area — with profile and color samples you can hold against the brick, not squint at on a screen. $0-down financing from 12 to 180 months (on approved credit) is quoted alongside.
Your call, real numbersWe pull any required permits, order to your measurements, and protect landscaping and walkways before the first panel comes off. If a storm claim is involved, adjuster meetings happen in this window.
Scheduled around youOld siding comes off, sheathing gets inspected and replaced where it's soft, then proper housewrap and flashing go on at every window and door before new panels, wrapped trim, soffit, and fascia finish each elevation tight.
3–5 working daysMagnet sweep for fasteners, every scrap hauled, and a walkthrough of all four elevations against the photo record — then the manufacturer's warranty plus our 2-year workmanship warranty, in writing.
In writingFamily-owned and operating across Maryland since 2005. Every contract carries our license numbers, every crew is fully insured, and every job is backed in writing.
Siding failures are cheap to fix the year they happen and expensive every year after. Our free annual exterior inspection walks every elevation — panels, seams, flashing, caulk lines — and documents anything storm-related while it's still claimable. It's a $400 service. You pay nothing, and the dated photo report is yours either way.
Book My Free Inspection →Vinyl is lighter on budget and maintenance; fiber cement takes paint, reads as premium, and resists impact better. We quote both so you compare real numbers.
If it's storm damage, often yes — siding is a standard claim line item. We document all elevations during the free inspection, provide the documentation your insurer needs, and meet your adjuster on site. On an approved claim, your deductible is typically your out-of-pocket cost. Your policy and carrier determine coverage.
Insulated and properly housewrapped siding reduces drafts and air infiltration. Combined with sealing the envelope, most homeowners notice steadier indoor temperatures.
Typical whole-home projects run $12,000–$20,000 in insulated vinyl and $18,000–$35,000 in fiber cement, depending on wall area, stories, and trim scope. Your free inspection produces exact side-by-side numbers in writing — and $0-down financing is available.
Most single-family homes take 3–5 working days including trim, soffit, and cleanup. We pull any required permits and protect landscaping while we work.
Increasingly, yes. It gives you real wood-grain warmth, weighs less than fiber cement (which keeps labor and detailing cleaner), and modern treatments handle rot and pests well. It sits between vinyl and fiber cement on price — which is exactly why we quote all three against your actual wall area instead of pushing one.
Yes — aluminum siding removal and replacement is one of our most common siding jobs in MD. Pre-1980 homes often carry original aluminum siding, and hail dents it permanently, which insurers routinely treat as storm damage. We remove the old aluminum panels, inspect the sheathing beneath, and install modern insulated vinyl or fiber cement — documenting every dented elevation with dated photos for your claim.
Yes — the same local crews that handle our roofing cover Bethesda, Chevy Chase, Potomac, Rockville, Silver Spring, and the rest of Montgomery County. As a Montgomery County siding contractor we also know which HOAs and historic districts have color and material rules — and we handle that paperwork.
If both are near end of life, yes — flashing, housewrap, drip edge, and trim all interlock where roof meets wall, and one crew doing both means that joint is detailed once, correctly. Start with the 60-second instant quote for the roof side, and the free inspection prices the combined project with one $0-down financing plan.
Within 24 hours, anywhere in Maryland. You keep the photo report either way.
Prefer to talk? (240) 880-2108
Local crews across Montgomery County and the rest of Maryland.
Free siding estimate Storm & hail damage to siding Siding insurance claims (Maryland) Roof replacement estimate
Deciding between materials is the whole job on a siding replacement, and the two most common candidates behave very differently in a Maryland winter. Aluminum vs vinyl siding, compared honestly →