Roof Replacement in Burtonsville
Full roof replacement and storm restoration for Burtonsville homeowners. Free 24-hour inspection with a photo report you keep. NOAA logged 74 storm reports in Montgomery County in the last 6 months.
- Full roof replacements for Burtonsville homes — not patches
- $850–$1,150 per square installed in Burtonsville — in writing before we start
- MHIC #111971 · A+ BBB Accredited · GAF limited lifetime material warranty
Two fields and one question. A Burtonsville specialist calls you back to confirm a time.
Roofing services in Burtonsville
Burtonsville is in Montgomery County. For who issues the roof permit here, which nearby towns permit separately, and the county's storm history, see roofing in Montgomery County →
What a roof actually costs in Burtonsville
In Burtonsville, architectural shingle runs about $850 to $1,150 per roofing square (100 sq ft) installed, which puts a typical Burtonsville single-family roof around $20,500–$27,500. We publish this because a contractor who will not talk about money until they are standing in your kitchen is managing you, not quoting you.
These are planning ranges from our published price book, not quotes, and they will vary — sometimes well outside the range. Roof pitch, the number of existing layers to tear off, deck condition found once the shingles are off, chimney/skylight/wall flashing, ventilation brought up to code, gutter and fascia work, and site access all move the number. A roof measured at 24 squares that turns out to have two layers and rotten sheathing is a different job than the one the range describes. The only accurate figure is a written line-item estimate after a free measured inspection. Get an instant online estimate →
From inspection to a roof that's done right
- 1Free 24-hour inspection & photo report. We document every slope, every penetration and every sign of hail or wind damage on your Burtonsville roof. The report is yours to keep either way.
- 2A written line-item estimate. Materials, tear-off, decking, flashing, ventilation, permit and warranty, each on its own line. Not a single number on the back of a card.
- 3Permit pulled, date scheduled. We pull the Burtonsville permit and the number goes on your contract. Most single-family roofs install in one day.
- 4Final walk and warranty registered. Magnet sweep of the property, photos of the finished work, GAF limited lifetime material coverage registered in your name, and our workmanship warranty stated in the contract you signed.
What we actually find on Burtonsville roofs
Burtonsville sits at the top corner of Montgomery County where it meets Howard and Prince George's, with housing running from 1960s ramblers through 1980s and 1990s colonials on wooded lots.
The tree canopy here is heavy and it is the dominant fact about these roofs. Shade keeps north-facing slopes damp, moss follows, and needles and leaves build dams in valleys that turn the next hard rain into standing water on a surface designed to shed it.
The 1960s ramblers have shallow pitches, and on a shallow pitch the underlayment and the flashing do the work, not the shingle. An estimate for one of these that talks only about shingle grade is answering the wrong question.
Burtonsville straddles a county line, which matters more than it sounds: a house with a Burtonsville address is not automatically in Montgomery County. Confirming the jurisdiction before filing is the difference between a permit and a wasted week.
Towns and ZIPs we cover from here
Our Burtonsville crews also work Silver Spring, Olney, Laurel, Colesville, Ashton — and every ZIP in the area: 20866. Same GAF-certified installation, same limited lifetime material warranty, same free 24-hour inspection whether you are on a main road or a quiet cul-de-sac.
Managing a building rather than living in one? Flat and low-slope work — TPO, EPDM, modified bitumen, coatings and maintenance programs — runs as a separate line with its own scheduling and insurance paperwork. See commercial and flat roofing →
Straight answers
Do you serve Burtonsville, MD?
Yes — United Developers serves all of Burtonsville and Montgomery County, including 20866 and nearby Silver Spring, Olney, Laurel. We are GAF Certified and licensed in Maryland (MHIC #111971).
What does a new roof cost in Burtonsville?
In Burtonsville, architectural shingle runs about $850 to $1,150 per roofing square (100 sq ft) installed, which puts a typical Burtonsville single-family roof around $20,500–$27,500. That is a planning range from our published price book, not a quote — the real number comes off a measurement and an inspection, because pitch, layers to tear off, deck condition, chimney and skylight flashing, and how much of the roof a crew can reach from the ground all move it.
Who pulls the roofing permit in Burtonsville?
Roof replacement in Burtonsville is permitted through Montgomery County Department of Permitting Services (DPS) (240-777-0311). We pull it, we schedule the inspection, and the permit number is on your contract — you should never be asked to pull your own roofing permit.
Is the Burtonsville roof inspection really free?
Yes. The inspection and the 20+ photo damage report are free and yours to keep whether or not you hire us. No inspection fee, no consultation invoice, and if your roof does not need work we will tell you that.
Will insurance cover my Burtonsville roof?
If your roof has storm, hail or wind damage, your policy may cover a replacement — on an approved claim your deductible is typically your out-of-pocket cost. We document the damage, provide a line-item estimate, and meet your adjuster on-site. We are a roofing contractor, not a public adjuster, and we do not negotiate your claim for you.
How fast can you get to my Burtonsville home?
We typically schedule a free inspection within 24 hours across Montgomery County. Calls are answered and appointments booked 24/7; crews work daylight hours. For an active leak call (240) 880-2108 and we will prioritise you.
Has there been storm damage in Montgomery County recently?
NOAA logged 74 storm reports in Montgomery County in the last 6 months. Storm data is preliminary NOAA/NWS public data; damage on your specific roof is confirmed at the inspection, not from a map.