Standing-Seam Metal Roof Replacement in Takoma Park
Family-owned since 2005, documenting 24-gauge standing-seam metal roof replacement, custom-bent trim, and a 40-70 year service life for Takoma Park homeowners. Free 24-hour inspection with a photo report you keep — even if you never hire us.
- Full roof replacements for Takoma Park homes — not patches
- Priced off your Takoma Park ZIP and a measured roof — in writing before we start
- MHIC #111971 · A+ BBB Accredited · GAF limited lifetime material warranty
Two fields and one question. A Takoma Park specialist calls you back to confirm a time.

Standing seam is roughly two to two-and-a-half times asphalt — and lasts two to three times as long
When metal is the right call on a Takoma Park house — and when it is not
Metal earns its premium in three situations, and we will tell you when yours is not one of them. Low-slope and porch roofs where asphalt was never really appropriate and has been failing on a cycle. Long, simple, uninterrupted runs — a standing-seam panel on a clean gable is fast and beautiful; the same panel on a roof broken up by six dormers, three valleys and a turret needs so much custom bending that the cost climbs faster than the benefit. And houses you intend to keep: at a 40–70 year service life, metal is the cheaper roof per year, but only if you are still there to collect that.
If you are planning to sell inside five years, or your roof is a complex multi-plane Takoma Park roofline, architectural asphalt is usually the better financial decision and we will say so.
Snap-lock vs mechanically seamed
On pitches of 3/12 and steeper we install snap-lock standing seam — concealed clips, no exposed fasteners, nothing through the panel face to leak in ten years. Below 3/12, and on any run with real water dwell, it has to be a mechanically seamed panel: the seam is folded closed on site with a seaming machine. Anyone quoting snap-lock on a low-slope section is quoting the cheaper install, not the right one.
The parts of a metal quote people get caught by
- Exposed-fastener panel is not standing seam. Corrugated agricultural panel screwed through the face costs a fraction of standing seam and has hundreds of gasketed holes in it. Those gaskets are the roof's service life. If a quote is far below the range above, this is usually why.
- Thermal movement. A long metal panel grows and shrinks with temperature. Clips must allow it. Panels fastened as though they were static oil-can, and eventually tear at the fastener.
- Trim is where metal is won or lost. Ridge, hip, valley, rake and the wall transitions are custom-bent on site. This is the line item worth reading, and the one that separates a metal roof at twenty years from one that is being repaired at eight.
- Ice and snow retention. Metal sheds snow in slabs. Over a Takoma Park entry, walkway or driveway, snow retention belongs in the scope.
Who signs off on a roof in Takoma Park
Roofing permits for Takoma Park are handled by Montgomery County Department of Permitting Services (DPS). Their permit line is 240-777-0311. We pull the permit as part of the job — you are not meant to be chasing this — but it is your house, so you should know who is actually deciding.
Worth knowing: Takoma Park adds a step most homeowners do not expect: the County issues the permit, but the City requires a Municipality Letter from Takoma Park first.
Takoma Park has a designated historic district. If your home falls inside it, the material you choose matters more than usual. Review is run by the Montgomery County Historic Preservation Commission, not by the permit office. Their line is 301-563-3400.
Montgomery County lists ordinary exterior maintenance — including roof repairs "with materials and design matching what is already in place" — as work that needs no Historic Area Work Permit, and lists "installing siding, shingle or masonry facing or other changes to exterior materials" as work that does. The county writes "repairs", not "replacement", so a full re-roof sits on the line even in matching material.
Permit rules change and depend on the scope of the work — replacing shingles, replacing decking and rebuilding a roof structure are not treated the same. Confirm anything that matters to you with the office above rather than with any contractor's website, including ours.
From inspection to a roof that's done right
- 1Free 24-hour inspection & photo report. We document every sign of hail and wind damage across your Takoma Park roof — yours to keep.
- 2We meet your adjuster on-site. We present the photo evidence and a line-item estimate so nothing legitimate gets overlooked.
- 3Approved & scheduled. Most Takoma Park roofs install in a single day — under a GAF limited lifetime material warranty, with our workmanship warranty written into the contract.
- 4You pay your deductible. On an approved storm claim, that's typically your only out-of-pocket cost.
Free Takoma Park roof inspection
Photo damage report within 24 hours, yours to keep either way, with no email wall to get it. Crews working Silver Spring, Hyattsville, Langley Park and every Takoma Park ZIP — 20912.
Get my free roof estimate ↑ Or call (240) 880-2108Metal Roof Replacement across Takoma Park & Montgomery County
Our Takoma Park crews cover Silver Spring, Hyattsville, Langley Park, Chevy Chase and every ZIP in the area — 20912. Same GAF-certified installation, same lifetime material warranty, same free 24-hour inspection whether you're on a busy main road or a quiet cul-de-sac.
We also work inside the house. United Developers is a licensed general contractor — see kitchens, bathrooms, basements and additions in Takoma Park.
Everything we do in Takoma Park · Storm & Hail Damage in Takoma Park · Roof Replacement in Takoma Park · Roof Leaks & Storm Damage in Takoma Park · Metal Roof Replacement in Silver Spring · Metal Roof Replacement in Hyattsville · Metal Roof Replacement in Chevy Chase · Roofing across Montgomery County · What a roof costs in Takoma Park
Straight answers
Do you serve Takoma Park, MD?
Yes — United Developers serves all of Takoma Park and Montgomery County, including 20912 and nearby Silver Spring, Hyattsville, Langley Park. We're GAF Certified and licensed in Maryland (MHIC #111971).
Is the Takoma Park roof inspection really free?
Yes. The inspection and the 20+ photo damage report are free and yours to keep, whether or not you hire us. There's no inspection fee, no consultation invoice.
Will insurance cover my Takoma Park roof?
If your roof has storm, hail, or wind damage, your policy may cover a replacement — on an approved claim your deductible is typically your out-of-pocket cost. We document the damage, provide a line-item estimate, and meet your adjuster on-site.
How fast can you get to my Takoma Park home?
We typically schedule a free inspection within 24 hours across Montgomery County. For active leaks or storm damage, call (240) 880-2108 and we'll prioritize you.
How much does a metal roof cost in Takoma Park, MD?
Standing-seam metal runs roughly two to two-and-a-half times architectural asphalt for the same roof, with a 40–70 year service life instead of 25–30. We price it off a measurement and an inspection, never off a phone call.
Is a metal roof worth it on a Takoma Park home?
It depends on three things and we will tell you honestly where you land. Metal wins on low-slope and porch sections where asphalt has been failing on a cycle, on long simple roof runs, and on a house you plan to keep for fifteen-plus years. It is usually the wrong financial call if you are selling within five years, or if your roofline is broken up by many dormers, valleys and turrets — the custom bending on a complex roof costs more than the extra life is worth.
Will a metal roof lower my insurance or make my Takoma Park roof more hail-resistant?
Metal does not dent-proof a roof: large hail can cosmetically dent a standing-seam panel, and some carriers write cosmetic-damage exclusions specifically for metal. What metal resists far better than asphalt is granule loss, mat fracture and wind uplift, which are the failures that actually end an asphalt roof's life. Some carriers do give a credit for an impact-rated roof — ask yours before you assume it.
Can you install metal over my existing Takoma Park shingles?
We tear off. A metal panel over existing shingles traps heat and moisture against the decking, hides whatever the decking is actually doing, and means nobody has inspected the substrate that the new roof depends on. It is faster and cheaper on the day and it is not how we build a 50-year roof.